Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ford Kuga

Model: Ford Kuga MK 3 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

See other generations:
Video tutorial

To change the front headlamp bulb on a Ford Kuga, stop the engine and open the bonnet to access the back of the headlamp unit. Remove the cover cap to reach the bulb, then disconnect the power connector.

Release the retaining clip or twist the bulb holder, depending on the configuration on the vehicle, and remove the bulb to be replaced. Insert the new compatible replacement, taking care not to touch the bulb with your hands.

Refit the fastening system, reconnect the electrical connector, and close the headlamp cover. Finally, turn on the lights to check that the new bulb illuminates correctly and that everything has been reassembled properly.


Posted on 27 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …
How to Replace the Headlight Bulb of a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) To replace the headlight bulb of a Ford Kuga, detach the plastic cover located immediately under the corresponding headlight. Then, open the bonnet a…
How to replace the headlight bulb of the Ford Kuga
How to replace the headlight bulb of the Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Replacing the right and left front headlight bulbs of the Ford Kuga is a simple and quick operation because thanks to the ample space of the front ho…

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos