Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb of a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Light bulb

To replace the headlight bulb of a Ford Kuga, detach the plastic cover located immediately under the corresponding headlight. Then, open the bonnet and loosen the screw that secures the headlight at the top, allowing it to be pulled from its housing while disconnecting the connector. Once removed, open the cover at the back and extract the bulb from its housing. At this point, insert the new bulb, connect the connector, and secure the headlight back into its housing.

Updated on 30 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …
How to replace the headlight bulb of the Ford Kuga
How to replace the headlight bulb of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing the right and left front headlight bulbs of the Ford Kuga is a simple and quick operation because thanks to the ample space of the front ho…
How to replace the headlight bulb on a Ford Kuga
How to replace the headlight bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Replacing the front headlight bulb of the 2009 Ford Kuga is a very simple operation that can be done independently. The first step is to park the car…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to change the sidelights in the Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos