Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Ford Kuga

Model: Ford Kuga MK 3 - Years 2020-2026
Part: Headlight bulb

This guide explains how to replace the left front headlight bulb of the Ford Kuga model. Always replace bulbs in pairs. Start by opening the bonnet. Next, remove the cover of the interior light to disconnect the connector and remove the bulb. Disconnect the connector and extract the bulb. Continue the replacement by inserting a new bulb and connecting it to the connector. Close the interior light and the bonnet, then move to the front of the vehicle to check the proper function of the headlight.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …
How to Replace the Front Headlamp Bulb on a Ford Kuga
How to Replace the Front Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) To replace the front headlamp bulb on a Ford Kuga, open the bonnet to access the components inside the engine bay: here you will find the internal pa…
How to Replace the Headlight Bulb of a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) To replace the headlight bulb of a Ford Kuga, detach the plastic cover located immediately under the corresponding headlight. Then, open the bonnet a…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos