Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Headlight bulb

Replacing the right and left front headlight bulbs of the Ford Kuga is a simple and quick operation because thanks to the ample space of the front hood, it is not necessary to remove the headlights. Let's open the front hood, position ourselves in front of the right headlight and remove the cap of the light fixture in order to extract the connector and disconnect it from the bulb. Insert the new bulb and proceed with closing the light fixture. Repeat the same steps on the left front headlight. Close the front hood, get into the vehicle, and turn on the lights to test their functionality.

Posted on 28 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Ford Kuga
Replacement of the front headlight bulb of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) If the front headlight bulb of the Ford Kuga burns out, for our safety it must be replaced as soon as possible. We open the hood of the engine compar…
How to Replace the Front Headlamp Bulb on a Ford Kuga
How to Replace the Front Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) To replace the front headlamp bulb on a Ford Kuga, open the bonnet to access the components inside the engine bay: here you will find the internal pa…
How to replace the headlight bulb of the Ford Kuga
How to replace the headlight bulb of the Ford Kuga
Ford Kuga (2020-2026 / MK 3) This guide explains how to replace the left front headlight bulb of the Ford Kuga model. Always replace bulbs in pairs. Start by opening the bonnet. …

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos