Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Electromechanical Box on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018

The same procedure applies to the Ford Kuga produced in the same years. With the steering perfectly straight, unscrew the bolt that secures the universal joint and remove it. For those who don't know, it is located just behind the pedals. Loosen the front wheel bolts, lift the car and remove the wheels, then detach the 'ends' from the 'hubs'. Remove the cover under the car, secured with T30 torx screws. Remove the bracket that goes from one side to the other (15 mm bolts) and all four smaller brackets that secure the lower part of the chassis. A jack should be placed under this and lowered later, until there is enough working space. Disconnect the wiring from the box, lift the stabiliser bar and remove the box.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box on a 2005 Ford Focus
Where to Find the Fuse Box on a 2005 Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) If you do not know the exact location of the fuse box in your 2005 Ford Focus, do not worry. Just read this guide carefully and follow the steps to l…
…
Steering Rack and Pinion Removal on Ford Focus MK3
Steering Rack and Pinion Removal on Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In today's video, we will see the steps to remove the steering rack and pinion on a Ford Focus MK3. First, lock the steering wheel and unscrew the pi…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

Resetting the Tyre Pressure Warning Light on the Hyundai I20

The following instructions will show you how to reset the tyre pressure warning light on the Hyundai I20; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; press and hold the TPMS button located on the controls to the left of the steering wheel, as well as on the dashboard, as shown in the video. If the tyre pressures are correct, the warning light will automatically reset on the instrument panel; finally, turn off the ignition and start the engine!

Watch the video!


by ScegliAuto

More videos