Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the EDC Light on an Iveco Eurocargo

Model: IVECO Eurocargo
Part: Warning light – error code

See other generations:
Video tutorial

The engine light on an industrial vehicle like the Iveco Eurocargo must not be ignored. An engine fault on a heavy vehicle can cause serious damage to itself and others.

After servicing, you can reset the EDC light, which is equivalent to an engine light, using the following method. Get into the vehicle, close the doors, and turn on the ignition: press the "call" button on the right side of the steering wheel once, then press the "down" button on the left side of the steering wheel twice.

Now press the "menu" button on the right side of the steering wheel (below the phone button) and the "plus" button on the left side of the steering wheel. Now press "Ok" (still on the "call" button) and the light will turn off. Turn off the ignition and turn it back on to verify.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Set the Clock on an Iveco Eurocargo
How to Set the Clock on an Iveco Eurocargo
IVECO Eurocargo To set the clock on an Iveco Eurocargo, turn on the instrument panel to navigate the menu using the steering wheel controls. Press the top button on …
What Does IBC Mean in Iveco Eurocargo
IVECO Eurocargo (2002-2008 / MK 1) The display located at the centre of the Iveco Eurocargo's instrument panel represents the IBC system: Iveco Body Computer. This device allows you to…
How to Replace the Brake Shoes on the Iveco Eurocargo?
How to Replace the Brake Shoes on the Iveco Eurocargo?
IVECO Eurocargo To replace the brake shoes on the Iveco Eurocargo, unscrew the bolts securing the wheel corresponding to the shoes being replaced, so that it can be …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos