Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Shoes on the Iveco Eurocargo?

Model: IVECO Eurocargo
Part: Brake drums and shoes

To replace the brake shoes on the Iveco Eurocargo, unscrew the bolts securing the wheel corresponding to the shoes being replaced, so that it can be completely removed. After removal, you will have access to the wheel hub, from which the bearings must be removed; you can then also slide off the drum, accessing the shoes inside it. These will be detached from the mechanism by removing the clips and replaced with new spare parts; after replacement, you can reassemble all the components removed earlier.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on an Iveco Eurocargo
How to Set the Clock on an Iveco Eurocargo
IVECO Eurocargo To set the clock on an Iveco Eurocargo, turn on the instrument panel to navigate the menu using the steering wheel controls. Press the top button on …
What Does IBC Mean in Iveco Eurocargo
IVECO Eurocargo (2002-2008 / MK 1) The display located at the centre of the Iveco Eurocargo's instrument panel represents the IBC system: Iveco Body Computer. This device allows you to…
How to Replace the Headlight Bulb on an Iveco Eurocargo
IVECO Eurocargo To replace the headlight bulb on an Iveco Eurocargo, you need to completely remove the front bumper by unscrewing the fastening screws and detaching …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos