Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Wheel

To replace the rear wheel on a Ford Focus, insert the jack into the chassis near the wheel and turn the corresponding knob to lift the car. Once lifted, loosen the bolts securing the wheel to the hub using the wheel replacement kit's socket wrench. When all bolts are loosened, remove the wheel and insert the spare wheel, which is located in the bottom of the boot: after the spare wheel is fitted, secure the bolts and lower the vehicle.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Ford Focus?
How to Replace the Rear Brake Pads on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the rear brake pads on a Ford Focus, loosen the bolts securing the rear wheel and completely remove it. This will allow access to the brak…
How to disassemble and replace the rear glass of the Ford Focus Cabriolet
How to disassemble and replace the rear glass of the Ford Focus Cabriolet
Ford Focus (2004-2011 / MK 2, Focus 2) Let's briefly see the instructions that will allow us to disassemble and replace the rear side glass of the Ford Focus Cabriolet. First of all, we tu…
How to Replace the Rear Shock Absorbers on a Ford Focus Mk1
How to Replace the Rear Shock Absorbers on a Ford Focus Mk1
Ford Focus (1998-2004 / MK 1) Before starting, gather the tools specified at the beginning of the video and then get to work replacing the rear shock absorbers on the Ford Focus M…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos