Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Reverse Light Bulb on Ford Kuga MK3

Model: Ford Kuga MK 3 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to disassemble and replace the bulbs of the rear light, in this case, the reverse light, on a 2020 Ford Kuga MK3. First, open the tailgate of the boot and unscrew the plastic caps behind the rear light using a socket spanner; then gently pull out the light unit, possibly using a plastic lever, as shown in the video.

At this point, disconnect the electrical connector of the bulbs and remove the reverse bulb; simply replace it with the new one and reassemble everything!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Ford Kuga (2020-2026 / MK 3) In this video, we will see how to change the reverse lights on a Ford Kuga MK3: Open the tailgate and unscrew the two bolts behind the light with an …
Ford Kuga (2020-2026 / MK 3) In this video, we will see how to replace the reverse light bulb of a Ford Kuga MK3: behind the rear light cluster there are two large plastic screws…
Ford Kuga (2012-2019 / MK 2, C520) Fog lights are extremely important, especially when visibility is low due to adverse weather conditions. If you need to replace them, this guide will…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos