Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the bulb of the fog lights in the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Fog lights

An enormous importance is given by the fog lights, which help us a lot during driving when the road has very low visibility due to fog. In case replacement is needed, this video, shot on a Ford Escape, can help us, but the procedure is the same for a Ford Kuga. It starts with removing the front wheel arch so there is space to access with hands, then accessing the fog light bulb holder, removing it, and finally pulling out the bulb to replace it. Reverse process to reassemble everything.

Posted on 19 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the BMS on the Ford Kuga
How to reset the BMS on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today we will see step by step instructions on how to reset the Battery Monitoring System (BMS) of the Ford Kuga. In the initial part of the video, t…
Replacing the Dipped/Full Beam Bulb on the Ford Kuga MK2
Replacing the Dipped/Full Beam Bulb on the Ford Kuga MK2
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, you will see how to remove and replace the dipped and full beam bulb on the second series Ford Kuga, following these simple s…
Replacing Reverse Lights on the Ford Kuga MK3
Replacing Reverse Lights on the Ford Kuga MK3
Ford Kuga (2020-2026 / MK 3) In this video, we will see how to change the reverse lights on a Ford Kuga MK3: Open the tailgate and unscrew the two bolts behind the light with an …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos