Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust Manifold Gasket on a Ford Kuga MK1

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the metal gasket of the exhaust manifold on a first-generation Ford Kuga. First, lift the vehicle to locate the part of the manifold where there may be an exhaust gas leak due to gasket failure.

If necessary, heat the manifold bolts and use a socket wrench to unscrew them, as shown in the video.

At this point, remove the manifold and replace the gasket with a new one, ensuring to clean the contact surface first!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Clean the Diesel Particulate Filter on the Ford Kuga?
How to Clean the Diesel Particulate Filter on the Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) To clean the diesel particulate filter, it must be removed: it is located at the bottom of the vehicle, near the driver's side door. Using a 15mm spa…
How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …
How to Replace the Battery in a Ford Kuga
How to Replace the Battery in a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) To replace the battery in a Ford Kuga, open the bonnet to access the components in the engine bay. The battery is located on the right side and can b…

How to Enter the Unlock Code for the Radio in the Nissan Micra?

In this tutorial, you will see how to enter the unlock code for the radio in the Nissan Micra, a very simple operation to perform in case of memory loss after replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. First, turn on the instrument panel, then repeatedly press the "1" button until you reach the first digit of the code. Follow the same logic to enter the remaining 3 digits using the "2", "3", and "4" buttons, and confirm the entry with the up arrow button.

Watch the video!


by ScegliAuto

More videos