Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Interior Bulbs on Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Interior dome light bulb

While seated in one of the front seats, insert a flat screwdriver into the designated slot of the ceiling light, located at the front towards the windscreen. Once the screwdriver is in, push down: the central cover containing the bulbs will detach. Disconnect the connector if you want to work in a more comfortable position, then unscrew the small black round cover and remove the transparent protective casing. You can now replace the LEDs and reassemble in reverse order: close the casing and reconnect the connector, finally push everything back into place.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Centre Console Trim in the Ford Fiesta?
How to Replace the Centre Console Trim in the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This tutorial shows how to replace the centre console trim in the Ford Fiesta, a very simple and quick operation. First, unscrew the knob and detach …
Replacing the Radio in a Ford Fiesta
Replacing the Radio in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replace the radio in a Ford Fiesta. Start by removing the trim around the instrument panel with a plastic lever (these are the air vents) and detach …
Replace Indicator Bulbs on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing the indicator bulbs mounted in the front headlamp of a Ford Fiesta. Here’s how to do it. Open the front bonnet by pulling the lever located…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos