Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs on a Ford Figo

Model: Ford Figo MK 1, B517 - Years 2010-2015
Part: Spark plugs

Discover in this brief and simple guide how to remove and replace the spark plugs on a Ford Figo by following the instructions below. First, open the hood and start by removing the air filter box, disconnecting the intake hose and the mass airflow sensor tube; then remove the spark plug wires using a socket wrench with an extension to unscrew and remove them, as shown in the video. Now install the new spark plugs, ensuring they have the same thread pitch, hand-tighten them and then tighten with a wrench, following the video tutorial to the end!

Updated on 21 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where to Find the Fuse Box on the Ford Figo
Where to Find the Fuse Box on the Ford Figo
Ford Figo (2015-2021 / MK 2, B562) If you own a Ford Figo and are wondering where the fuse box is located, follow these steps to find it. First, reach the front passenger seat and open…
How to Replace the Air Filter on the Ford Figo
How to Replace the Air Filter on the Ford Figo
Ford Figo (2010-2015 / MK 1, B517) In this new mini guide for your Ford Figo first series (2010-2015), discover the steps required to correctly replace the engine air filter. First, co…
Where is the fuse box of the Ford Figo located?
Ford Figo (2010-2015 / MK 1, B517) In this new guide, we will discover how you can quickly and safely locate the fuse box of your first generation Ford Figo. First, turn off the car an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos