Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Ford Transit

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Spark plugs

See other generations:
Video tutorial

Today, you will learn how to replace the spark plugs on a Ford Transit model MK7. Before starting, open the bonnet and remove the clip that secures the air duct to the air filter. Once the air duct is disconnected, open the filter cover and remove the filter inside.

Using a 7 mm socket, loosen the nuts and remove the air filter box. Disconnect the connectors and using an 8 mm socket, unscrew the fastening screws. Remove the spark plug cover and disconnect the spark plugs from the connector.

Before inserting the spark plug into the coil, apply some grease to help it slide in smoothly, then insert the spark plugs and reattach the cover. Reconnect the connectors.

Reassemble the air duct and the air filter box.


Posted on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Ford Transit
How to Replace the Spark Plugs on a Ford Transit
Ford Transit (2006-2014 / MK 7) To replace the spark plugs on a Ford Transit, open the bonnet to access the top of the engine block. Here, unscrew the bolts securing the ignition co…
How to Replace the Spark Plugs on the Ford Transit?
How to Replace the Spark Plugs on the Ford Transit?
Ford Transit (2014-2024 / MK 8) To replace the spark plugs on the Ford Transit, open the bonnet to access the components inside the engine bay: at the top of the engine block, you w…
How do you replace the candles of the Ford Transit?
How do you replace the candles of the Ford Transit?
Ford Transit (2014-2024 / MK 8) To replace the spark plugs of the Ford Transit, you will need to open the hood so that you can access the top of the engine block. Here, you will nee…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos