Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Dipped Beam Bulbs in a Ford Transit Van?

Model: Ford Transit MK 6 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight bulb

See other generations:
Video tutorial

Replacing a dipped beam bulb in the Ford Transit van is a straightforward and quick task. Start by ensuring the key is not in the ignition.

Open the rear cover of the headlamp by pressing the clip located at the top side. For the passenger side, you may need to disconnect the air filter housing to gain more working space.

Once you have access to the bulb, disconnect the connector and remove it by unlocking the metal clip. Insert the replacement bulb, taking care not to touch the glass directly with your hands.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Ford Transit (2006-2014 / MK 7) To replace the starter motor on the Ford Transit, access the lower part of the engine bay: here, immediately next to the oil tank, you will find the …
Ford Transit (2006-2014 / MK 7) In this guide, you will discover where the fuse box is located inside your Ford Transit Mk7 (2006-2014) and what you need to do to access the fuses f…
Ford Transit (2014-2024 / MK 8) If you are looking for the additional fuse box of your Ford Transit (year 2021), but you have not been able to locate it yet, then all you have to do…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos