Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Roof Bars on a Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Roof rack bars

See other generations:
Video tutorial

In this tutorial, you will see how to fit roof bars on a Ford Focus, a very simple and quick operation. This model does not have any holes, so you will need to obtain suitable bars like those shown in the video.

First, open the doors, then adjust the distance between the bar supports and position them about halfway up the upper side of the door. Next, tighten the fixing bolts, adjusting the arms for height as well, and repeat the operation for the second bar. If you want to remove everything, simply follow the reverse procedure.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Install Roof Bars on a Ford Focus
How to Install Roof Bars on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) On our Ford Focus, you can install two crossbars that serve as roof racks, available as aftermarket parts. Here’s how to proceed with their installat…
How to Fit Roof Bars on a Ford Focus
How to Fit Roof Bars on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To fit the roof bars on a Ford Focus, first assemble the bars: insert the bar into the bracket, which should be properly placed into its base. Then, …
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos