Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Roof Bars on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Checks and maintenance

To fit the roof bars on a Ford Focus, first assemble the bars: insert the bar into the bracket, which should be properly placed into its base. Then, secure all pieces using the appropriate screws. Next, remove the small panels located on the trims on the roof: inside, there will be a sealant that, once removed, will allow you to access the underlying screw. Once all sealants have been removed, position the bars on the roof and secure them to the car by properly tightening the fixing bolts. Finally, insert the rubber along the entire length of the bar.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fit Roof Bars on a Ford Focus?
How to Fit Roof Bars on a Ford Focus?
Ford Focus (2011-2018 / MK 3) .. In this tutorial, you will see how to fit roof bars on a Ford Focus, a very simple and quick operation. This model does not have any.. …
How to Install Roof Bars on a Ford Focus
How to Install Roof Bars on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) On our Ford Focus, you can install two crossbars that serve as roof racks, available as aftermarket parts. Here’s how to proceed with their installat…
How to Remove the Headlining on a Ford Focus
How to Remove the Headlining on a Ford Focus
Ford Focus (2011-2018 / MK 3) Want to remove the headlining from a Ford Focus? Here’s how to take apart the pieces to remove the headlining. Unscrew the fastening screws of the si…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos