Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the front fog lights of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Fog lights

These short and simple instructions will show us how to install the front fog lights of the Ford Focus. First of all, let's move to the front and start by removing the bumper grilles in order to install the fog lights; then we pass the wiring and apply the appropriate fuse to protect the fog light lamps, as shown in the video. At this point, it is necessary to install the fog light switch on the dashboard, if not already present in its predisposition; then we verify the correct operation of both fog lights!

Posted on 6 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front fog light bulbs of the Ford Focus.
Replacement of the front fog light bulbs of the Ford Focus.
Ford Focus (2011-2018 / MK 3) In this short guide, we will see the instructions that will allow us to disassemble and replace the front fog lights of the Ford Focus. First of all,…
How to Adjust the Headlights on a Ford Focus?
How to Adjust the Headlights on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, we will see how to adjust the headlights on a Ford Focus, a very simple and quick operation. First, position the vehicle in front o…
How to adjust the headlights on a Ford Focus?
How to adjust the headlights on a Ford Focus?
Ford Focus (2018-2025 / MK 4) In this tutorial, we can see how to adjust the headlights on the Ford Focus, a very simple and quick operation. First, we park the vehicle in front o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos