Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Fog Light Bulbs on the Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Light bulb

In this video, you will see how to replace the front fog light bulbs on the Ford Focus estate. To do this, it is advisable to slightly raise the front of the vehicle (consider using ramps). From underneath, disconnect the connector that is already visible: to do this, widen the two side clips and pull. Now, simply turn the bulb to extract it along with the holder. Refit everything with a good quality bulb (55 watts) to ensure visibility, especially in adverse conditions such as fog.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulbs on Ford Focus
Replacing Front Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the front headlamp bulbs on your Ford Focus blown? Let's replace them. Open the bonnet by pulling the lever located at the bottom right of the da…
Replace Headlamp Bulbs on Ford Focus
Replace Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Remove the front headlamp from the Ford Focus to replace the bulbs inside. Lift the bonnet that covers the engine and locate the securing screws for …
Replacing Front Headlamp Bulbs on Ford Focus
Replacing Front Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide, learn how to remove and replace the front headlamp bulbs on a second-generation Ford Focus. First, open and lift the bonnet of your ca…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos