Replacing Grille on Ford Focus RS

Model: Ford Focus MK 3 - Years 2011-2018
Part: Grille

The procedure for replacing plastic parts on vehicles built from 2012 onwards is particularly straightforward. In most cases, it is sufficient to locate a few retaining clips and simply unlock them, leaving you with the piece literally in hand. This means that body parts such as bumpers, grilles, badges, etc., are installed by clipping in and do not require special tools for removal. The same applies to the 2015 Ford Focus RS shown in the video. Starting from the upper right corner, insert your index and middle fingers into the grille and push against the bonnet with your thumb (it's better to do this with both hands). The grille will detach towards you. Repeat the procedure in the centre and on the sides. The installation is done in exactly the same way, simply by pressing.

Updated on 20 March 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Body - Maintenance and repair on other vehicles

Grille - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

Replacing Grille on Ford Focus RS

Related tutorials

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

More videos