Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the plastic cover of the windshield of the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018

In this video tutorial we will see how to disassemble and replace the plastic cover of the windshield of the Ford Focus, in simple and quick steps. First of all, we raise the hood of the car and start disassembling and removing the windshield wipers and their arms, unscrewing the fixing screws that we find at the base; then we unscrew the fixing screws of the plastic cover of the windshield, which we find on the sides, in order to detach and remove it. At this point we disassemble and replace the windshield, replacing the gasket if necessary; finally, we reassemble the cover and the windshield wipers!

Posted on 8 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen on a Ford Focus?
How to Replace the Windscreen on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the windscreen on a Ford Focus, completely detach the seal that surrounds the windscreen along its entire perimeter. Once the seals are re…
How to Remove the Interior Rear-View Mirror from the Ford Focus 2
How to Remove the Interior Rear-View Mirror from the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) To remove the interior rear-view mirror from the cabin of your Ford Focus second series (2004-2011), follow these instructions. First, get into the c…
How to Remove the Rear Spoiler on a Ford Focus
How to Remove the Rear Spoiler on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides instructions for removing the rear spoiler on a Ford Focus in simple and quick steps. First, open the rear tailgate and start rem…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos