Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to put the front windshield wipers of a Ford Focus in service position

Model: Ford Focus MK 4 - Years 2018-2025
Part: Windshield wipers

In this video we can see how to put the front windshield wipers of the Ford in service mode. This procedure positions the wipers near the edge of the windshield to allow easy access to the brushes during an inspection, both to check the condition of the brushes themselves, and to replace them when necessary. The procedure is the same for Focus, Kuga, and Mondeo: we turn on the ignition and immediately turn it off, while lowering the wiper stop lever. We will see the brush stopping in a vertical position, which will allow us to easily perform all the necessary work.

Posted on 8 September 2024 by ScegliAuto

Video tutorial

Related tutorials

What is the Front Wiper Relay in the Ford Focus?
What is the Front Wiper Relay in the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) If the front wipers on your Ford Focus suddenly stop working, the first thing to check is the condition of the respective relay. As shown in this vid…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
How to reset the TPMS light on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The steps to reset the TPMS light, related to tire pressure, on a 2007 Ford Focus are simple and quick to do independently. The first step is to turn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos