Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wipers on a Ford Focus, lift the wiper arm off the windscreen until it is in a vertical position. Rotate the blade to access the fixing point and locate the release tab on the attachment.

Press the catch and slide the blade down to free it from the arm hook. Take the new blade and attach it following the same orientation as the one removed, sliding it until it locks in place.

Check that the attachment is securely fixed by pulling lightly on the blade. Carefully lower the arm back onto the windscreen to avoid damaging the glass.

Repeat the same operation on the other wiper and, once the installation is complete, operate the system to check the correct functioning of the new blades.


Posted on 8 June 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Ford Focus
How to Replace the Wiper Blades on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) It's that time of year when you need to replace the wiper blades, but you don't know how to do it yourself? Don't worry, today with our video tutoria…
How to Set the Front Wipers of a Ford Focus in Service Position
How to Set the Front Wipers of a Ford Focus in Service Position
Ford Focus (2018-2025 / MK 4) In this video, you can see how to set the front wipers of a Ford in service mode. This procedure positions the wipers close to the edge of the windsc…
Replacing the front wiper blades on the Ford Focus 3
Replacing the front wiper blades on the Ford Focus 3
Ford Focus (2011-2018 / MK 3) In this short and simple guide, see how to remove and replace the front wiper blades on the third generation Ford Focus. First, move to the front of …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos