Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the GasGas MC 125 engine?

Model: Gasgas Mc 125
Part: Engine

Video tutorial

To assemble the GasGas MC 125 engine, you will need to loosen the screws that secure the engine block to its housing located at the front of the motorcycle: once the support screws are removed, you can proceed by loosening the intake manifold screws and disconnecting the cables connected to the engine.

Once the engine is freed, you can proceed by opening the engine block after loosening the screws that secure the cylinder and the cylinder head: this will give you access to the piston, which must be removed from its seat to access the connecting rod and the crankshaft, replacing the necessary components.


Posted on 24 April 2025 by ScegliAuto


Related tutorials

How to Change the Oil in the Gearbox of a Gasgas MC 125
How to Change the Oil in the Gearbox of a Gasgas MC 125
Mc 125 Today, we will see the necessary instructions to change the transmission oil of the Gasgas MC 125 enduro bike. First, place the bike on a stand and s…
How to Replace the Exhaust on a GasGas MC 125
Mc 125 To replace the exhaust on the GasGas MC 125, loosen the bolts securing the right side panel at the rear of the bike. Once these bolts are removed, yo…
How to replace the exhaust on the GasGas MC 125?
How to replace the exhaust on the GasGas MC 125?
Mc 125 Replacing the exhaust on the GasGas MC 125 involves loosening the screws that secure the cover panel on the right side of the rear mudguard: once thi…

How to Change the Transmission Oil on a Honda PCX 125 Scooter?

In this tutorial, you will learn how to change the transmission oil on a Honda PCX 125 scooter, a very simple and quick operation. First, ensure the engine is sufficiently cool for safe operation, then position a container beneath the transmission casing, locate both the drain bolt and the fill bolt, and unscrew them using a 12mm socket. Allow all the oil in the system to drain out, tighten the lower bolt, and add new oil using a large syringe. Finally, tighten the upper bolt.

Watch the video!


by ScegliAuto

More videos