Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Gasgas Mc 125 - Video guides

Gasgas Mc 125
How to Change the Oil in the Gearbox of a Gasgas MC 125
Today, we will see the necessary instructions to change the transmission oil of the Gasgas MC 125 enduro bike. First, place the bike on a stand and start …Read all…
Posted on 27 March 2026 by ScegliAuto
Gasgas Mc 125
How do you disassemble the GasGas MC 125 engine?
To assemble the GasGas MC 125 engine, you will need to loosen the screws that secure the engine block to its housing located at the front of the motorcycle: …Read all…
Posted on 24 April 2025 by ScegliAuto
Gasgas Mc 125
How to Install Handguards on the GasGas MC 125?
To install handguards on the GasGas MC 125, loosen the counterweights located at the ends of the handlebars: these can now be completely removed from their …Read all…
Posted on 30 October 2026 by ScegliAuto
Gasgas Mc 125
How to Replace the Cylinder on a GasGas MC 125?
To replace the cylinder on the GasGas MC 125, loosen the screws that secure this part to the top of the engine block. Once released, disconnect the intake and …Read all…
Posted on 24 October 2026 by ScegliAuto
Gasgas Mc 125
How to replace the exhaust on the GasGas MC 125?
Replacing the exhaust on the GasGas MC 125 involves loosening the screws that secure the cover panel on the right side of the rear mudguard: once this panel is …Read all…
Posted on 5 October 2026 by ScegliAuto
Gasgas Mc 125
How to Replace the Exhaust on a GasGas MC 125?
To replace the exhaust on a GasGas MC 125, loosen the screws that secure the side panel on the right side of the mudguard. Once this panel is removed, you can …Read all…
Posted on 27 September 2026 by ScegliAuto
Gasgas Mc 125
How to Replace the Exhaust on a GasGas MC 125
To replace the exhaust on the GasGas MC 125, loosen the bolts securing the right side panel at the rear of the bike. Once these bolts are removed, you can take …Read all…
Posted on 11 October 2026 by ScegliAuto

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos