Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cylinder on a GasGas MC 125?

Model: Gasgas Mc 125
Part: Engine

Video tutorial

To replace the cylinder on the GasGas MC 125, loosen the screws that secure this part to the top of the engine block. Once released, disconnect the intake and exhaust pipes, and then disconnect the connectors related to its sensors.

This will allow the cylinder to be completely removed to access the piston inside; the new cylinder can then be inserted into the top of the engine block, securing it with the appropriate screws and repositioning the pipes and connectors.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

Mc 125 To assemble the GasGas MC 125 engine, you will need to loosen the screws that secure the engine block to its housing located at the front of the moto…
Mc 125 To replace the exhaust on the GasGas MC 125, loosen the bolts securing the right side panel at the rear of the bike. Once these bolts are removed, yo…
Mc 125 Replacing the exhaust on the GasGas MC 125 involves loosening the screws that secure the cover panel on the right side of the rear mudguard: once thi…

How to Change the Transmission Oil on a Honda PCX 125 Scooter?

In this tutorial, you will learn how to change the transmission oil on a Honda PCX 125 scooter, a very simple and quick operation. First, ensure the engine is sufficiently cool for safe operation, then position a container beneath the transmission casing, locate both the drain bolt and the fill bolt, and unscrew them using a 12mm socket. Allow all the oil in the system to drain out, tighten the lower bolt, and add new oil using a large syringe. Finally, tighten the upper bolt.

Watch the video!


by ScegliAuto

More videos