Do it yourself
Frequently asked questions about cars and motorcycles
In order to install the handguards on the GasGas MC 125, you need to loosen the handlebar end weights. These can now be completely removed from their housing so that the end of the handguards can be inserted into their place. Once this is fixed, the other end can also be fixed at the beginning of the grip. When both ends are inserted, they must be properly secured with screws to ensure that the handguard is properly fixed.

Posted on 17 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Mc 125 Today, we will see the necessary instructions to change the transmission oil of the Gasgas MC 125 enduro bike. First, place the bike on a stand and s…
Mc 125 The replacement of the exhaust on the GasGas MC 125 is done by loosening the screws that fix the covering panel on the right side of the rear fender:…
Mc 125 In order to replace the exhaust pipe of the GasGas MC 125, you need to loosen the screws that secure the panel on the right side of the fender: once …

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos