Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec 300
Part: Clutch

To replace the clutch on the GasGas EC 300, loosen the screws that secure the cover on the right side of the vehicle, allowing you to completely detach it from its seat. This will give you access to the underlying clutch discs, which can then be freed from their screws. Once the old clutch is completely removed, proceed by inserting the new discs and securing them with the appropriate screws; then cover everything with the casing and check the correct operation of the component.

Posted on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the GasGas EC 300?
How do you replace the clutch of the GasGas EC 300?
Ec 300 It will be possible to replace the clutch of the GasGas EC 300 by loosening the screws that fix the clutch cover: the cover can now be removed from i…
How to Replace the Clutch Cylinder on a GasGas EC 300?
How to Replace the Clutch Cylinder on a GasGas EC 300?
Ec 300 To replace the clutch cylinder on the GasGas EC 300, loosen the screws securing the cover on the left side of the bike, under which the clutch is loc…
How do you replace the clutch of the GasGas EC 300?
How do you replace the clutch of the GasGas EC 300?
Ec 300 The clutch that is installed on the GasGas EC 300 can be removed and replaced by unscrewing the screws that secure the clutch cover. The cover can no…

How to change the engine oil in a Harley Davidson Road Glide?

To change the engine oil in a Harley Davidson Road Glide, follow these steps. First, ensure the engine is warm but not too hot. Lift the bike on a central or side stand to ensure a stable position. Locate the oil drain plug and the oil fill cap on the engine. Remove the oil fill cap to allow the old oil to drain more easily. Then, place a collection container under the oil drain plug. Remove the oil drain plug and let the old oil drain completely. Once draining is complete, replace the oil drain plug and tighten it securely. Then, fill the engine with new oil through the fill cap to the recommended level. Ensure you use high-quality engine oil recommended by the manufacturer. Check the oil level using the dipstick and add oil if necessary. Finally, start the engine and let it run for a few minutes to allow the oil to circulate properly. Check the oil level again and add if necessary. Make sure to dispose of the used oil properly at an authorised collection centre.

Watch the video!


by ScegliAuto

More videos