Engine Oil Change on Gasgas EC 300

Model: Gasgas Ec 300
Part: Engine oil

This video is currently unavailable

In this video, we will see the instructions for changing the engine oil while performing the regular maintenance service on a Gasgas EC 300 enduro bike. First, position the bike on the stand and remove the bash plate by unscrewing the fixing screws; then unscrew the oil drain bolt using a socket spanner and allow the oil to drain into a container for at least ten minutes.

At this point, insert the new engine oil into the designated fill hole located at the top and fill to the correct level!

Updated on 5 April 2026 by ScegliAuto

Related tutorials

Performing the Maintenance Service (Oil Change) on Gasgas EC 300

Ec 300 In today's video, you will see all the steps to change the engine oil as part of the regular maintenance service on a Gasgas EC 300 enduro bike. Firs…

How to Change the Gear Oil on a GasGas EC 300?

Ec 300 You can change the gear oil on a GasGas EC 300 by loosening the drain plug on the transmission casing, which is located at the bottom centre of the b…

Oil Change for the Gasgas EC 300 Gearbox

Ec 300 This guide provides the main instructions on how to change the oil in the gearbox of the Gasgas EC 300 enduro bike. First, place the bike on the stan…

How to Replace the Air Filter in a KTM Duke 790?

In this tutorial, you will learn how to replace the air filter in a KTM Duke 790, a very simple and quick operation. First, remove the passenger seat, then unscrew the two screws just released and also remove the rider's seat. Next, locate the airbox cover plate, unscrew the fixing screws, and remove it. Now, extract the old filter, clean the inside of the housing from any debris, and insert the new one. To reassemble everything, simply follow the reverse procedure.

Watch the video!

by ScegliAuto

Engine Oil Change on Gasgas EC 300

Related tutorials

How to Replace the Air Filter in a KTM Duke 790?

More videos