Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gasgas
    3. : Mc 450f : How to install the graphics on the Gasgas MC 450F

Model: Gasgas Mc 450f
How to install the graphics on the Gasgas MC 450F

In this video tutorial we will see how to correctly install the graphics on the fairings or on the bodywork on the Gasgas MC 450F enduro bike, but also on other enduro bikes. First of all, let's clean the affected areas perfectly, where the graphics must be applied; then we remove any pieces that clutter the fairings, such as the saddle. At this point we apply the adhesive graphics, then going to heat them to make them adhere better; it is advisable to remove the front fender to apply the graphics: follow the video to the end!


Posted on 3 March 2024 by ScegliAuto

How to disassemble the battery in the Yamaha R6?

In this tutorial we can see how to remove the battery in the Yamaha R6, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then unscrew the two bolts indicated and lift the driver's seat. Next, locate the battery, loosen the fixing screws of the terminals and, starting from the negative, disconnect both. At this point, all that remains is to unscrew the two side bolts, remove the battery, insert the replacement and reassemble everything simply by following the reverse procedure. Make sure to reconnect the positive pole before the negative.

Watch the video!


by ScegliAuto

More videos