Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stator on the KTM XC 300

Model: Ktm Xc 300

Video tutorial

This guide will provide the main instructions on how to dismantle and replace the stator on the KTM XC 300 enduro bike. First, place the bike on a stand and begin by removing the stator cover, unscrewing the fastening screws located on the sides with a socket spanner; then disconnect the main connector of the stator, removing it along with the cover, as shown in the video.

At this point, replace the stator with the new one of the correct type; refit the stator in the same position, then install the stator cover!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Replace the Stator on a GasGas XC 300
How to Replace the Stator on a GasGas XC 300
Xc 300 To replace the stator on the GasGas XC 300, first loosen the screws securing the protective cover located on the left side of the bike next to the sp…
How to Replace the Coolant in the KTM XC 300
How to Replace the Coolant in the KTM XC 300
Xc 300 Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start b…
How to Replace the Front Headlight on the KTM XC 300
How to Replace the Front Headlight on the KTM XC 300
Xc 300 In this guide, we will look at the main instructions on how to remove and replace the front headlight of the KTM XC 300. First, place your bike on a …

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos