Do it yourself
Frequently asked questions about cars and motorcycles
To replace the stator on the GasGas XC 300, first loosen the screws securing the protective cover located on the left side of the bike next to the sprocket. After unscrewing the screws, remove the cover to access the components underneath. The bolts securing the stator must be loosened to completely remove the part from its housing. Then, insert the new stator, securing it with the bolts and covering everything with the protective cover, ensuring everything functions correctly.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Xc 300 This guide will provide the main instructions on how to dismantle and replace the stator on the KTM XC 300 enduro bike. First, place the bike on a st…
Xc 300 Watch this video for step-by-step instructions on removing and replacing the crankshaft oil seal (located behind the sprocket) on a Gasgas XC 300 end…
Xc 300 To replace the clutch of the KTM XC 300, you need to loosen the screws that secure the clutch cover on the right side of the bike: once this cover is…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos