Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Clutch Discs on the Gasgas EC 300

Model: Gasgas Ec 300
Part: Clutch

Video tutorial

In today's video tutorial, you will learn how to replace the clutch discs on the Gasgas EC 300 enduro bike, following the instructions below. First, drain the transmission oil by unscrewing the drain bolt located underneath the engine; then unscrew all the screws of the clutch cover to access the discs, as shown in the video.

At this point, unscrew the screws of the clutch pack to remove the discs, replacing them with new ones; then reassemble everything, alternating cork discs with metal ones.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Ec 300 In this tutorial, learn how to carry out a full service on the Gasgas EC 300 by following the instructions below. First, remove the wheels from your …
Ec 300 Today's guide will illustrate the main steps on how to disassemble and replace the clutch discs on the Gasgas EC 300 enduro bike. First, remove the c…
Ec 300 This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bi…

How to Set the Time

In this new mini guide dedicated to your Amigo Jax 150 scooter, you will discover how to correctly set the time on the instrument panel. First, ensure that the scooter is completely off and positioned correctly on its stand. At this point, insert the key and turn on only the instrument panel, then press and hold the button located at the bottom right until the hour digits start to flash. Use the upper button to change the hours. Move to the minutes by pressing the lower button again and repeat the same operation.

Watch the video!


by ScegliAuto

More videos