Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec 250
Part: Engine

To remove the engine from the GasGas EC 250, loosen all the bolts that secure it to the appropriate mounts so that it can be extracted from its housing, disconnecting the connectors as well. Once the engine is removed, you can unscrew the screws that secure the two half-casings, accessing internal components such as the clutch, piston, etc. This way, you can modify or replace the relevant parts; after the modifications are complete, refit the two half-casings and insert the engine back into its housing.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant on Gasgas EC 250
How to Replace the Coolant on Gasgas EC 250
Ec 250 Today, we will see the instructions that will allow us to replace the engine coolant on the Gasgas EC 250 enduro motorcycle. First, place the bike on…
Engine Oil Change for the Gasgas EC 250
Engine Oil Change for the Gasgas EC 250
Ec 250 Today, we will go through the instructions for performing routine maintenance by changing the engine oil on the Gasgas EC 250 enduro bike. First, war…
Dismantling the Carburettor on a Gasgas EC 250
Dismantling the Carburettor on a Gasgas EC 250
Ec 250 In this tutorial, we will go through the steps to dismantle the carburettor on a Gasgas EC 250 enduro bike, following the instructions below. First, …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos