Do it yourself
Frequently asked questions about cars and motorcycles
Briefly, we will go through the procedure to drain and refill the transmission oil of the Gasgas EC 300 2-stroke enduro bike. First, place the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter cartridge, replacing it if necessary. At this point, unscrew the fill cap and refill with the new gearbox oil suitable for your transmission, pouring in the correct amount.

Updated on 10 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Ec 300 This guide provides the main instructions on how to change the oil in the gearbox of the Gasgas EC 300 enduro bike. First, place the bike on the stan…
Ec 300 In this tutorial, learn how to carry out a full service on the Gasgas EC 300 by following the instructions below. First, remove the wheels from your …
Ec 300 To change the transmission oil in the EC 300, position the bike so that you can work on it safely (for example, lean it against a wall as shown in th…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos