Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Mc 85
Part: Engine oil

To change the motor oil of a Gas Gas MC 85, start by warming up the engine for a few minutes to fluidify the oil. Turn off the engine and place the motorcycle on a stand to ensure stability. Locate the oil drain plug on the engine and position a collection basin underneath it. Use a wrench to loosen the plug and let the oil drain completely into the basin. Once the draining is complete, replace the drain plug and tighten it securely. Next, locate the oil fill plug, usually located on the side of the engine. Remove the plug and slowly pour the recommended amount of new motor oil as stated in the owner's manual. Make sure to use a funnel to avoid spills. Once the oil has been added, replace the fill plug and tighten it. Check that the drain plug and fill plug are securely tightened. Finally, start the engine for a few minutes and check for any oil leaks. If everything is in order, the oil change of your Gas Gas MC 85 will be completed.

Posted on 26 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the GasGas MC 85?
Mc 85 In this tutorial, see how to change the engine oil in the GasGas MC 85, a very simple and quick operation. Since the drain hole bolt is located just …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos