Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to connect a new car radio and connect a subwoofer on the Geely Lc

Model: Geely Lc MK 1 - Years 2008-2016
Part: Car stereo

If we are going to customize your car and go to update the stereo system, follow the instructions below, we can go to the cockpit with a small screwdriver to pry and extract the plastic frame located around the car radio, be careful then release the rear clamps. There are screws under the frame that you need to unscrew in order to remove the car radio, then pull the car radio towards you and disconnect all the terminals that are present in the rear part. Take the new multimedia system, follow the assembly instructions and above all the wiring of both the stereo system and the subwoofer located in the luggage compartment. Finally, reposition the radio and reassemble everything.

Posted on 17 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to install Android car stereo on Geely Lc 1.0
How to install Android car stereo on Geely Lc 1.0
Geely Lc (2008-2016 / MK 1) In this video tutorial we will see the main instructions that will allow us to disassemble and replace the stock car stereo with an Android type of t…
How to replace the rear fog light bulb on the Geely LC.
How to replace the rear fog light bulb on the Geely LC.
Geely Lc (2008-2016 / MK 1) Today, in this video tutorial, we will see how to disassemble and replace the rear fog light bulb of the Geely LC in simple and quick steps. First of…
How to remove the door panel in the Geely LC?
How to remove the door panel in the Geely LC?
Geely Lc (2008-2016 / MK 1) In this tutorial we can see how to remove the door panel in the Geely LC, a very simple operation. First of all, unscrew the single screw of the inte…

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos