Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Geely LC?

Model: Geely Lc MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

Video tutorial

In this tutorial, you will see how to remove the door panel on a Geely LC, a very simple operation. First, remove the single screw from the inner mirror panel, then take it off, unclip the cover of the grab handle, and remove the 2 bolts underneath.

Next, using a flathead screwdriver or preferably a plastic trim tool, unclip the panel by prying it starting from the bottom. Once removed, disconnect the window switch connector and the lock cable, and proceed with installing the replacement.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Remove the Outer Door Handle of the Geely LC
How to Remove the Outer Door Handle of the Geely LC
Geely Lc (2008-2016 / MK 1) Discover the necessary instructions for removing and replacing the outer door handle of the Geely LC in this brief and simple guide. First, open the …
How to Install an Android Radio in the Geely LC 1.0
How to Install an Android Radio in the Geely LC 1.0
Geely Lc (2008-2016 / MK 1) In this video tutorial, you will find the main instructions to remove and replace the factory radio with an Android type in the Geely LC 1.0. First, …
How to Replace the Climate Control Knobs on the Geely LC
How to Replace the Climate Control Knobs on the Geely LC
Geely Lc (2008-2016 / MK 1) In today's video tutorial, you will see, in simple and quick steps, how to remove and replace the climate control knobs on the Geely LC, following th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos