Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Nebraska 125
In order to disassemble the engine of the Gilera Nebraska 125, you need to loosen the screws that fix the block to its supports, at the central part of the frame: you also need to disconnect the connectors connected to the engine block and loosen the screws fixing the manifolds. Now you can proceed by loosening the screws fixing the cylinder head and cylinder, in order to remove them to access the internal piston: this must be detached from the connecting rod so that you can access the crankshaft and replace all the necessary components.

Posted on 18 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Start a Gilera Runner 125
How to Start a Gilera Runner 125
Runner 125 Before you can start, position your Gilera Runner 125 on its central stand. Next, insert the key into the ignition switch and turn it fully clockwise…
How to Dismantle the Variator of the Gilera Nexus 125 ie
How to Dismantle the Variator of the Gilera Nexus 125 ie
Nexus 125 Ie This guide explains how to dismantle and replace the variator of the Gilera Nexus 125 ie scooter, following the instructions below. First, place the …
How to Remove the Engine from a Gilera DNA 125
How to Remove the Engine from a Gilera DNA 125
Dna 125 To remove the engine from a Gilera DNA 125, first disconnect it from its housing by unscrewing the bolts that secure it in place and disconnecting al…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos