Do it yourself
Frequently asked questions about cars and motorcycles

Model: Lml Star 125
Part: Wheel

This guide shows the steps to remove and replace the front and rear wheel of the LML Star 125, as well as the Piaggio Vespa PX 125. First, place the central stand and start unscrewing the five nuts of the front wheel to remove it; you can then replace the front tyre using levers to remove it from the rim. At this point, proceed to remove the rear wheel in the same manner (always unscrewing the five nuts; replace the wheel rim if necessary, applying the reverse procedure for reassembly!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
Star 125 Today's instructions will show you how to remove and replace the fuel tank on the LML Star 125, as well as the Piaggio Vespa PX 125. First, place the…
Star 125 Today's guide will show us the main steps to disassemble and replace the starter motor of the LML Star 125, as well as the Piaggio Vespa PX 125. Firs…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos