Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wheel Hub of the LML Star 125

Model: Lml Star 125
Part: Brake drums and shoes

Video tutorial

Today, let's go through the necessary steps to remove and replace the front wheel hub of the LML Star 125, as well as the Piaggio Vespa PX, in simple and quick steps. First, place the central stand and begin by removing the front wheel.

Next, undo the central wheel bolt, removing the small metal cotter pin as shown in the video. At this point, remove the wheel hub and replace it with the new one; grease the hub spindle and reassemble everything, following the video tutorial to the end!


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of an LML Star 125
How to Remove the Rear Wheel of an LML Star 125
Star 125 Before you can begin, position your LML Star 125 on the centre stand. Start by detaching and removing the left side panel. Next, remove the spare whe…
How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Remove the Wheels from the LML Star 125
How to Remove the Wheels from the LML Star 125
Star 125 This guide shows the steps to remove and replace the front and rear wheel of the LML Star 125, as well as the Piaggio Vespa PX 125. First, place the …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos