Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlight Bulb on Gilera Nexus 500

Model: Gilera Nexus 500
Part: Tail light bulb

Video tutorial

Guide for replacing the rear headlight bulb on a Gilera Nexus 500. Obtain a P21 5W 12-volt bulb. Lift the seat and using a star screwdriver, unscrew the two upper screws of the rear fairing.

Release the fairing by sliding it outwards. Using the star screwdriver, unscrew the four screws of the rear headlight, two located at the top and two at the ends of the headlight.

Release the headlight and pull it outwards. Replace the bulb and test its operation.

If the new bulb does not light, ensure that the electrical contacts of the bulb holder are not oxidised. If the contacts are oxidised or rusty, clean them thoroughly with electrical contact spray and brush with a small brush.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Replacing Front Headlamp Bulb on Gilera Nexus 500
Replacing Front Headlamp Bulb on Gilera Nexus 500
Nexus 500 Today, you will learn how to remove and replace the front headlamp bulb on a Gilera Nexus 500. First, remove the front logo and unscrew the screws un…
Replacing the Rear Indicator Bulb on Gilera Nexus 500
Replacing the Rear Indicator Bulb on Gilera Nexus 500
Nexus 500 In this video tutorial, you will learn how to remove and replace the indicator bulb on a Gilera Nexus 500 in simple steps. First, remove the indicato…
Replacing Glove Box Light Bulb on Gilera Nexus 500
Replacing Glove Box Light Bulb on Gilera Nexus 500
Nexus 500 In this short video tutorial, you will see instructions on how to remove and replace the light bulb of the glove box (the one under the seat) on a Gi…

How to Replace the Gear Oil of the Piaggio Vespa PX 125

To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos