|
Do it yourself
| |||
| ||||
|
Model: Gilera Runner 50
This brief guide shows how to remove the carburettor from a Gilera Runner SP 50 scooter in simple steps. First, remove the fuel hose, disconnecting it from any filter if present; then loosen the screws on the clamps found on both the intake and air ducts. At this point, you can disconnect and remove the carburettor as shown in the video; next, the disassembly and cleaning of the float chamber and the idle and main jets are illustrated: follow the video to the end for complete reassembly!
Updated on 15 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Runner 50
In this guide, we will see the instructions that will allow us to remove and replace all the plastic fairings of the Gilera Runner 50 scooter. First,…
Runner 50
This guide outlines the steps to remove and replace the drive belt of the Gilera Runner 50 scooter. First, place the scooter on the centre stand and …
Runner 50
This guide outlines the main steps to remove and replace the fuel tank float on a Gilera Runner 50 scooter. First, place the scooter on the centre st…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |