Do it yourself
Frequently asked questions about cars and motorcycles

Model: Gilera Runner 125
Part: Engine

To dismantle the engine of a Gilera Runner, remove the protective fairings and loosen the bolts that secure it within its housing: this will allow the engine block to be removed from its seat. Once extracted, unscrew the screws that secure the two half casings, also loosening the screws that hold the cylinder at the top: this will allow access to the components inside, which can be removed and potentially replaced with new spare parts. After replacement, reassemble the engine, installing it back into its housing.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Runner 125 Before you can start, position your Gilera Runner 125 on its central stand. Next, insert the key into the ignition switch and turn it fully clockwise…
Runner 125 In this video, you will see instructions on how to change the oil during the regular maintenance service on a Gilera Runner 125 scooter. First, posit…
Runner 125 To replace the exhaust of the Gilera Runner 125, you need to loosen the fixing screws of the supports that hold the component in place, next to the r…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos