Do it yourself
Frequently asked questions about cars and motorcycles
Before you can start, position your Gilera Runner 125 on its central stand. Next, insert the key into the ignition switch and turn it fully clockwise. Once done, pull and hold the brake lever, then press and hold the start button located below the throttle grip. Keep it pressed until the engine starts. Once the engine is running, you can release the start button and the brake lever, completing the procedure.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Runner 125 In this guide, you will learn how to remove the original exhaust from a Gilera Runner 125 scooter. First, position the central stand and unscrew the …
Runner 125 In this video, you will see instructions on how to change the oil during the regular maintenance service on a Gilera Runner 125 scooter. First, posit…
Runner 125 To replace the exhaust of the Gilera Runner 125, you need to loosen the fixing screws of the supports that hold the component in place, next to the r…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos