Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Overhaul and Installation of Variator on Gilera Runner 125 - Piaggio Typhoon

Model: Gilera Runner 125
Part:

Video tutorial

In this video tutorial, you will learn how to overhaul and install the variator and transmission components of a Gilera Runner 125 scooter. First, check that all your components (drive belt, primary and secondary gears, variator, and rollers) are in perfect condition; then position your gears and subsequently the variator with the rollers inside.

Next, position the clutch and the drive belt to the fan, and then tighten the bolts to reassemble the engine cover, following the video until the end!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to replace the variator on a Gilera Runner 125?
How to replace the variator on a Gilera Runner 125?
Runner 125 To replace the variator on a Gilera Runner 125, loosen the bolts securing the cover at the rear of the bike, on the left side of the rear wheel. Once…
How to Replace the Transmission on a Gilera Runner 125
How to Replace the Transmission on a Gilera Runner 125
Runner 125 To replace the transmission on a Gilera Runner 125, loosen the screws securing the cover of the casing located near the rear wheel. Once the casing i…
How to service the fork on a Gilera Runner 125?
How to service the fork on a Gilera Runner 125?
Runner 125 To service the fork on a Gilera Runner 125, first remove the fork from its housing: to do this, loosen the bolts securing the front wheel's axle so t…

How to Replace the Air Filter on the Royal Enfield Meteor 350

To replace the air filter on the Royal Enfield Meteor 350, loosen the bolts securing the side cover on the left side of the bike. Once these bolts are loosened, remove the cover to access the filter underneath. The filter can be removed from its housing by disconnecting its securing bolts and replacing it with a new spare part. After inserting the new filter, secure it in place with the bolts and reinstall the removed cover.

Watch the video!


by ScegliAuto

More videos