|
Do it yourself
| |||
| ||||
How to service the fork on a Gilera Runner 125?
Model: Gilera Runner 125
Video tutorial
To service the fork on a Gilera Runner 125, first remove the fork from its housing: to do this, loosen the bolts securing the front wheel's axle so that the wheel can be removed after loosening the bolts securing the brake caliper. Next, loosen the screws that attach the fork to the handlebars, completely detaching it. The fork can now be opened, removing the springs inside and draining all the oil, which will need to be replaced.
Updated on 29 September 2026 by ScegliAuto
Related tutorials
Runner 125
In this video, you will see instructions on how to change the oil during the regular maintenance service on a Gilera Runner 125 scooter. First, posit…
Runner 125
To replace the rear fairings on the Gilera Runner 125, open the under-seat compartment to access the screws inside. Specifically, unscrew those at th…
Runner 125
In this guide, you will learn how to remove the original exhaust from a Gilera Runner 125 scooter. First, position the central stand and unscrew the …
|
How to Replace the Variator of the Honda PCX 125
This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |