|
Do it yourself
| |||
| ||||
|
Model: Gilera Runner 125
To replace the rear fairings on the Gilera Runner 125, open the under-seat compartment to access the screws inside. Specifically, unscrew those at the rear to detach the fairing located just above the number plate. At this point, you can remove it and proceed with the removal of all additional fairings after unscrewing their fastening screws. Once all fairings are removed, insert the new ones and reattach the seat.
Updated on 9 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Runner 125
To dismantle the engine of a Gilera Runner, remove the protective fairings and loosen the bolts that secure it within its housing: this will allow th…
Runner 125
To replace the variator on a Gilera Runner 125, loosen the bolts securing the cover at the rear of the bike, on the left side of the rear wheel. Once…
Runner 125
It will be possible to replace the exhaust pipe of the Gilera Runner 125 by loosening the screws that fix the terminal to its housing, near the rear …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
