Do it yourself
Frequently asked questions about cars and motorcycles
To replace the engine oil of the Harley Davidson Fatboy, you will need to loosen the drain plug located at the central bottom of the vehicle. Once the plug is removed, you can let all the used oil flow into a properly positioned container. Then, you can also remove the filter, which is located in the same position, so you can install the new one. At this point, you can proceed with topping up the oil. You will need to add the required amount of oil through the filler on the right side to ensure everything is functioning properly.

Posted on 17 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Fat Boy To change the engine oil of the Harley Davidson Fat Boy, loosen the drain plug located at the bottom centre of the bike. Once the plug is loosened, c…
Fat Boy Briefly, we will see the instructions on how to perform routine maintenance by replacing the engine oil and oil filter of the Harley Davidson Fat Boy…
Fat Boy In this tutorial, see how to replace the transmission oil in a Harley-Davidson Fat Boy, a very simple and quick operation. First, wait for the engine…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos