Do it yourself
Frequently asked questions about cars and motorcycles
For this motorcycle, it is recommended to use Harley Davidson 20W-50 lubricant. Start the bike for a few minutes to warm the oil, which will become more liquid and drain out more easily. Unscrew the screw that holds the drain pipe in the oil sump, then remove the cap and collect the used oil in a container. It is advisable to also open the upper fill hole (just unscrew the cap) to avoid a vacuum and facilitate the draining process. Close the drain pipe and reposition it, insert the new lubricant through the upper hole, and close that as well.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Forty Eight Sportster In this tutorial we can see how to replace the engine oil in the Harley-Davidson Forty-Eight, an extremely simple and quick operation. First of all, …
Forty Eight Sportster In this tutorial, you will see how to replace the front headlight on a Harley-Davidson Forty Eight, a very simple and quick operation. First, ensure …

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos